Extech 412440-S Current Loop Checker
|
The Extech 412300A is a low cost 4-20 mA DC loop calibrator with a new large LCD display and Loop power supply built-in.
|
The Extech 412355A sources and measures 4-20mA process loops as well as DC Voltage
|
Need a quick 4-20 loop checker for a low price? The Martel MS-420 is your solutions! Outputs 4, 8, 12, 16 and 20 mA instantly at the flick of a switch.
|
The Extech 412400 Oyster multifunction process calibrator sources and measures mA, mV, Voltage and thermocouple signals.
|
Druck UPS-II Loop Calibrator
|
Ametek Jofra mACAL Loop Calibrator
|
Fluke 705 Loop Calibrator
|
Druck UPS III Loop Calibrator
|
The Fluke 707 is a Basic mA Loop Calibrator.
|
The Fluke 787 is a mA Loop Calibrator with a built-in multimeter
|
The new Martel LC-110 current loop calibrator encompasses the newest in electronics technologies and ease of use. The LC-110 features an easy to use interface with quick set dial knob, thus outputing current loop levels in seconds.
|
The Fluke 789 mA Loop Calibrator with a built-in Multimeter
|
The METRAHIT CAL calibrator functions as a highly accurate calibration and simulation instrument for electrical quantities.
|
Fluke 715 DC Process Calibrator
|
The Fluke 707Ex is an Intrinsically Safe mA Loop Calibrator.
|
The Martel PSC-4010Process Signal Calibrator spurces voltage, current and frequency signals. The PSC-4010 is a portable, handheld, full function read and source device with a newly designed brite display. Direct replacement for the Martel PSC-4000.
|
The new Martel LC-110H current loop calibrator encompasses the newest in electronics technologies and ease of use. The LC-110H features an easy to use interface with quick set dial knob and acts as a basic Hart Communicator
|
The METRAHIT MULTICAL, compact multifunction process calibrator convinces by ruggedness, simple handling, highest functionality, precision and PC system ability.
|
Fluke 724 Multifunction Temperature Calibrator
|
Fluke 725 Multifunction Process Calibrator with Optional Pressure Calibration Capability
|
The Martel MC-1010 process calibrator provides high accuracy and functionality. This single calibration instrument will calibrate virtually any process device including: read and source thermocouples, RTDs, Ohms, Voltage, Current, Frequency and pressure
|
The Martel MC-1210 dual display process calibrator is the functional replacement for the popular Martel MC-1200. It features the ability to test, measure and simulate thermocouples, RTDs, current, voltage, and frequency
|
The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind.
|
The Fluke 725Ex Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. It is the ideal tool for calibration work in Class I, Division 1 Groups B-D
|
The Martel DMC-1410 Documenting Multi Function Process Calibrator fully documents all calibrations associated with fixed installation and laboratory instruments. The DMC-1410 Calibrator requires no special software and is easy to use.
|
Martel M2000 Benchtop DC Voltage and Current Calibrator now includes an IEEE interface standard.
|
The new Fluke 753 process calibrator is the next generation of the ever popular Fluke 743B. The Fluke 753 adds a new brighter screen and longer battery life along with simultaneous source and measure capabilities of all popular process signals.
| | |