| | |
|
| |
| | |
|
|
|
Please Select the Calibrator Type Below:
|
Site Special
FREE UPS
GROUND SHIPPING
(USA Lower 48 States Only, $100 minimum)
|
|
|
Meriam's M1 Series of handheld manometers from Meriam Process Technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. For reference indication and shirt pocket convenience, select the low cost M1
|
Meriam's M1 Series of handheld manometers from Meriam Process Technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 calibrator delivers +/- 0.10% FS accuracy and additional features.
|
|
|
Druck PV411A Calibration Hand Pump Air or Fluid Operated, 4 Pumps in 1 Unit
|
BetaGauge PI Pro Digital Pressure Test Gauge
|
The new Fluke 700G digital pressure gauge calibrator makes an ideal portable pressure calibration solution. The Fluke 700G is a durable gauge and can be fitted with a pump, fittings and case kit. The 700G is available with a calibration certificate
|
The Martel BetaGauge PIR reference test gauge is the most accurate digital pressure gauges available at 0.04% of reading accuracy. The Martel PIR is truly a pressure calibrator in a pressure gauge housing.
|
Druck PV411A-HA Calibration Pump Kit Air or Fluid Operated, 4 Pumps in 1 Unit (Note: DPI-740 Calibrator Shown Above not Included)
|
The Fluke 707Ex is an Intrinsically Safe mA Loop Calibrator.
|
|
The new Martel LC-110H current loop calibrator encompasses the newest in electronics technologies and ease of use. The LC-110H features an easy to use interface with quick set dial knob and acts as a basic Hart Communicator
|
The BetaGauge 301 is a low cost single range pressure calibrator with 0.05% Full Scale accuracy.
|
Ametek-Jofra ETC-400A Dry Block Calibrator (28 to 400 Deg C)
|
Techne UCAL 400+ Dry Block Temperature Calibrator heats to 400 °C quickly and accurately. Many optional inserts are available.
|
The Martel 330 means technicians will have a small, lightweight hand held calibrator that generates pressures up to 300 PSIG using a high performance integral electric pump.
|
|
The Fluke 725Ex Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. It is the ideal tool for calibration work in Class I, Division 1 Groups B-D
|
|
Ametek-Jofra CTC-1200A High Temp Dry Block Calibrator (300 to 1205 C)
| |
Credit cards accepted
|
|
|