| | |
|
| |
| | |
|
|
Martel M2001 Benchtop Multifunction Calibrator
|
OUR PRICE: Discontinued, Replaced by Martel 3001
Item Number: M2001
Manufacturer: Martel Electronics (Beta)
Manufacturer Part No: M2001
Personalization
* denotes required field
IEEE Computer Interface*
PC Interface Cable (RS-232)*
NIST Traceable Calibration*
|
Martel M2001 Lab Standard
Benchtop Calibrator
The Martel 2001 Bench Calibrator is designed to offer laboratory
grade accuracy at a hand-held calibrator price. This new unit incorporates
multiple temperature and voltage ranges and a milliamp range. The
M2001 has the ability to store up to 9 setpoints for each output range.
the setpoints can be selected manually or automatically stepped at timed
intervals. The M2001 also features a user interface similar to a Fluke 5500
calibrator as well as computer control through an RS-232 or optional IEEE 488
interface for automated production testing.
Features:
• Source or Measure up to 10 T/C or
10 RTD's with an Accuracy of up to 0.025 C
• Measure Pressure using External Fluke 700 Pressure Modules
• RTD Simulation Works with all Pulsed Transmitters
• Source DC Volts from mV to 100
VDC and Source Current to 100mA
Technical Specifications:
| Power Requirements |
120/240 VAC |
| Remote Interface |
RS-232 and GPIB (IEEE 488-2 optional) |
| Circuit Protection |
Internal Self Resetting Fuses |
| Display |
16 x 2 Large Character
Alphanumeric with LED Backlight |
| Size |
Approx. 11.5" x 4.7" x 12" |
| Weight |
Approx. 5 pounds |
| Function |
Output Range |
Input Range |
Resolution |
Accuracy**(1 year) |
|
100mV |
0 to 100.000mV |
N/A |
1uV |
+/-0.003% +/-3 counts |
|
1V |
0 to 1.00000V |
N/A |
10uV |
+/-0.003% +/-2 counts |
|
10V |
0 to 10.0000V |
N/A |
100uV |
+/-0.003% +/-2 counts |
|
100V |
0 to 100.000V |
N/A |
1mV |
+/-0.003% +/-2 counts |
|
100mA |
0 to 100.000mA |
N/A |
1uA |
+/-0.01% +/-2 counts |
|
T/C |
J,K,T,E,R
S,N,B,L,U,mV |
J,T,E,R,
S,N,B,L,U,mV |
Out 0.1C/F
In 0.01 C/F |
Type J Typical 0.16C
Type J Typical 0.16C |
|
RTD* |
PT385 (100, 200, 500, 1000)
PT392, PT3916(JIS)
Ni120, Cu10, YSI400 |
PT385 (100, 200, 500, 1000)
PT392, PT3916(JIS)
Ni120, Cu10, YSI400, 25 Ohm SPRT |
Typical PT385-100
Out 0.1 C/F
In 0.01 C/F |
Typical PT385-100
+/- 0.10C
+/-0.020C |
|
Ohms |
N/A |
0 to 100.000 |
0.001 |
40 PPM ± 0.02 |
|
0 to 400.00 |
0 to 400.00 |
Out 0.01
In 0.001 |
+/-0.03
40 PPM +/-0.002 |
|
0 to 4000.0 |
0 to 4000.00 |
Out 0.1
In 0.01 |
+/-0.3
40 PPM +/-0.02 |
|
Pressure |
M2001 works with all Fluke 700 Series
Pressure Modules from 0-1" H2O to 10,000 psi |
Module
Dependant |
0.025% F.S. Typical | * All W /RTD inputs are 4W
**All Accuracy specs are "% of reading"
unless otherwise noted.
Fluke 700P Pressure Modules
Features:
• Display pressure readings in any of 10 different pressure units you specify in the calibrator setup
• Rugged urethane molded case protects the module from rough handling and harsh conditions
• Features internal temperature compensation from 0°C to 50°C for full-accuracy performance
• Includes NIST-traceable calibration certificate
• Module can be calibrated locally using the Fluke 700PCK Pressure Calibration Kit,
a PC, and a precision pressure source
• One year warranty
Order Modules By Individual Part Number Located in the First Column of the Above Table |
|
|
|
OUR PRICE: THIS MODEL WAS DISCONTINUED REPLACED BY T-970
Ametek T-740 Pneumatic Calibration Pump Generates 200 PSIG
|
OUR PRICE: THIS MODEL WAS DISCONTINUED REPLACED BY T-975
Ametek T-750 Pneumatic Vacuum Calibration Pump Generates 0-25" Hg Vacuum
|
|
|
OUR PRICE: THIS ITEM WAS DISCONTINUED - WAS REPLACED BY T-975 (SEE BELOW)
Ametek T-930 Combination Pressure/Vacuum Calibration Pump generates 500 PSIG/28" Hg Vacuum
|
Beta Port-P Pressure Module
| |
|
|
|