Ametek Jofra APC Advanced Pressure Calibrator

     
The Ametek APC Calibrator in Action!

      The JOFRA APC calibrators are the latest in the new generation of AMETEK handheld pressure calibrators. This series was designed to meet high accuracy pressure calibration applications and to make your tasks easier. The APC offers features such as dual information display, 17 different pressure units, transmitter supply, scalable mA input for % error calculation, serial communications, and external pressure module capability.

     The accuracy of the APC calibrators is deadweight caliber throughout the range and is temperature compensated for operation in controlled or in process applications. This is a truly superior pressure calibrator. 

     The JOFRA APM series of pressure modules extends the application base for the APC calibrators by allowing for calibrations in ranges other than those of the indicator; and at a lower cost than purchasing another APC. The APM modules are also compatible with several other JOFRA calibrators. You can perform a calibration locally without returning the APC unit to the manufacturer. All you need is an accurate pressure reference. If you do require factory calibration, the pump and indicator are independent and only the indicator needs to be returned.

      The JOFRA APC is an extremely accurate handheld pressure calibrator that offers several user-friendly features and superior performance. The APC is available as an indicator or in one of 6 test-ready systems that are complete and equipped to meet your pressure calibration needs,  where accuracy, flexibility, and quality cannot be compromised.

      Large digits display the pressure, icons show current status and mode, and smaller digits show device-under-test conditions. Save time and effort in calculating the error between the APC and the device-under-test by entering the pressure range corresponding to 4-20 mA. This gives immediate read-out of the error in %. You can also just read mA or % of 4-20 mA in the display.

      Keep the high accuracy: ZERO the instrument with the single button zeroing before every test. Store peak values (upper and lower). Read the highest and lowest presure value since your last reset of the APC. Shutoff feature that extends battery life.

      Available in 8 different pressure ranges from -12 psi (-0.850 bar) vacuum to 10,000 psi (700 bar). Instant conversion of pressure readings to 17 different  units of measure, e.g. bar, kPa, mPa, Atm, kgf/cm2, cmH2O, mmHg, psi, inH2O, inHg, ftH2O.  Perform semi-automatic pressure switch tests. The APC records the "close" and "open" pressure values and calculates the hysteresis (deadband). You can change the pressure and the APC does the rest.

Features:

• Available in Ranges from Vacuum to 10,000 
• High accuracy +/-0.04% of reading +/-0.01% of full scale with no low range degradation in accuracy.
• Fully Temperature Compensated
• Ideal for on-site use
• Complete ready-to-use calibration systems
• Record min and max readings Easy field re-calibration of the unit via serial port
• More than 60 External Pressure Modules with accuracy up to 0.01% 
• Transmitter scaling, % Error Calculations with User Defined Scaling
• Easy pressure switch test, Records open/close pressures

  Select from over 60 remote pressure modules for your APC calibrator.  See our complete selection by Clicking Here.

Standard Delivery:

• APC calibrator with integral pressure sensor
• Traceable calibration certificate (NIST)
• 9 V Battery
• NPT to BSP female
• Test leads; red and black
• Soft carrying case, Shoulder Strap
• User manual

Specifications:

Additional Information

Ametek-Jofra APC Pressure Calibrtor PDF Brochure