|
Martel MC-1200 Multifunction Process Calibrator
Martel MC-1200 Process Calibrator
The Martel MC-1200 Multi-Function Calibrator provides a feature set unmatched in high accuracy, hand-held calibrators in its price range. The MC-1200 Calibrator provides the functions and accuracy associated with fixed-installation, laboratory instruments, and has everything needed for virtually any calibration task. Measure and source thermocouples, RTDs, current, voltage, and frequency, and source pulse trains.
A communications port compatible with Fluke® 700 Series, Mensor®, and Martel pressure modules is provided, as is an isolated mA/V read-back circuit. Arrow keys, direct numeric keypad entry, and three software-driven function buttons, plus a large backlit, menu-driven graphics display combine to provide a highly intuitive, simple yet powerful operator interface.
Built-in 250 Ohm resistor for Hart™ compatibility, compatibility with smart transmitters and PLCs, full fuseless protection, and a serial communications port for full control with ASCII commands, are just some of the additional features that make the MC-1200 the single, most indispensable tool available for virtually any calibration task. The MC-1200 is supplied in a tough, rubber boot; a carrying case is also available as an option.
Features:
-
Measure and source T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency; source pulse trains
-
Isolated mA/V read-back circuit for complete transmitter calibration
-
Pressure module communication port compatible with Fluke 700 Series, Mensor, and Martel pressure modules
-
Built-in 24 V supply can drive 4-20 mA loops up to 1000 Ohms
-
Direct entry of custom RTD coefficients (RO, A, B, C)
-
All source modes can be programmed with dedicated setpoints to speed calibration and linearity tests
-
Highest accuracy in class to 0.015% of reading
-
Meets CE requirements and is designed to IEC 1010 safety standard Technical Specifications
| Voltage Read and Source |
| Source |
0.000 to 20.000 VDC |
Read
Isolated
Non-isolated |
0.000 to 30.000 VDC
0.000 to 20.000 VDC |
| Thermocouple mV |
| Read and Source |
-10.000 to +75.000 mV |
| Current (mA) |
| Source |
0.000 to 24.000 mA |
Read
Isolated
Non-isolated |
0.000 to 24.000 mA
0.000 to 24.000 mA |
| Frequency (1 to 20 V selectable amplitude) |
| CPM Source and Read |
2.0 to 600.0 CPM |
| Hz Source and Read |
1.0 to 1000.0 Hz |
| kHz Source and Read |
1.0 to 10.00 kHz |
| Pulse (Source only; 1 to 20V selectable amplitude) |
| Pulses |
1 to 30,000.0
2 CPM to 10 kHz |
| Ohms |
| Source |
5.0 to 4000 Ohms |
| Read |
0.00 to 4000.0 Ohms |
| Thermocouple Read and Source |
| J Thermocouple |
-200.0 to +1200.0 C |
| K Thermocouple |
-200.0 to +1370.0 C |
| T Thermocouple |
-200.0 to +400.0 C |
| E Thermocouple |
-200.0 to +950.0 C |
| R Thermocouple |
-20.0 to +1750.0 C |
| S Thermocouple |
-20.0 to +1750.0 C |
| B Thermocouple |
+600.0 to +1800.0 C |
| C Thermocouple |
0 to +2316.0 C |
| XK Thermocouple |
-200.0 to +800.0 C |
| BP Thermocouple |
0 to +2500.0 C |
| L Thermocouple |
-200.0 to +900.0 C |
| U Thermocouple |
-200.0 to +400.0 C |
| N Thermocouple |
-200.0 to +1300.0 C |
| RTD Read and Source |
| Ni120 (672) |
-80.0 to +260.0 C |
| Pt100 (385) |
-200.0 to +800.0 C |
| Pt100 (3926) |
-200.0 to +630.0 C |
| Pt100 (3916) |
-200.0 to +630.0 C |
| Pt200 (385) |
-200.0 to +630.0 C |
| Pt500 (385) |
-200.0 to +630.0 C |
| Pt1000 (385) |
-200.0 to +630.0 C |
| Cu10 |
-100.0 to +260.0 C |
| YSI400 |
+15.00 to +50.00 C |
| Cu50 |
-180 to +200 C |
| Cu100 |
-180 to +200 C |
| Pt385-10 |
-200 to +800.0 C |
| Pt385-50 |
-200 to +800.0 C |
| Environmental |
| Operating Temperature |
-10C to +50C |
| Storage Temperature |
-20C to +70C |
| Stability |
+/-0.005% of reading/C outside of 23 C +/-5C |
Power Requirements
Batteries |
6 VDC
4x AA; alkaline or optional rechargeable |
Physical
(includes rubber boot)
Dimensions
Weight |
8.7"H x 4.2"W x 2.3"D (220.9 x 106.6 x 58.4 mm)
30.5 ounces (863 gms) |
| Accessories Included |
Test leads, 4-AA alkaline batteries
NIST Certificate, and instruction manual |
| Optional Accessories |
Carrying Case, Model CC572 |
| Accuracy |
| Voltage |
+/-0.015% of reading, +/-2 mV |
| Thermocouple mV |
+/-0.02% of reading, +/-10 µV |
| Thermocouple Errors (in C; add 0.2 for Cold Junction Compensation error) |
| Type J |
0.2 C |
| Type K |
0.3 C |
| Type T |
0.2 C |
| Type E |
0.2 C |
| Type R |
1.2C |
| Type S |
1.2 C |
| Type B |
1.2 C |
| Type C |
0.6 C |
| Type XK |
0.2 C |
| Type BP |
0.9 C |
| Type L |
0.2 C |
| Type U |
0.25 C |
| Type N |
0.4 C |
| RTD Read and Source |
| Ni120 (672) |
0.2 C |
| Pt100 (385) |
0.2 C |
| Pt100 (3926) |
0.2 C |
| Pt100 (3916) |
0.2 C |
| Pt200 (385) |
0.8 C |
| Pt500 (385) |
0.4 C |
| Pt1000 (385) |
0.2 C |
| Cu10 |
0.1 C |
| YSI400 |
1.4 C |
| Cu50 |
0.4 C |
| Cu100 |
0.3 C |
| Pt385-10 |
1.4 C |
| |
Read |
Source |
| Current (mA) |
+/-0.015% of reading, +/-2 uA |
+/-0.015% of reading, +/-2 uA |
| Hz |
+/-0.05% of reading |
+/-1 LSD +/-0.05% of reading |
| kHz |
+/-0.05% of reading, +/-1 LSD |
+/-0.125% of reading |
| Ohms |
400 Ohm Range
4000 Ohm Range |
+/-0.025% of reading, +/-0.05 W
+/-0.025% of reading, +/-0.5 W |
+/-0.025% of reading, +/-0.05 W
+/-0.025% of reading, +/-0.5 W |
(23 C +/-5 C unless otherwise noted)
Turn Your MC-1200 into a Pressure Calibrator
The MC-1200 is compatible with Fluke®, Mensor®, and Martel/Beta pressure modules.
(Pressure modules require accessory Model 700MA Module Adapter.)
Order Pressure Modules by Individual Part Numbers: ie 700PA3.
NEED A CALIBRATION PUMP (CLICK HERE)
|
Price: $1,895.00
Buy Product Online | Visit Store Home
|
|
|
Manufactured by Martel Electronics (Beta) |
|
|
|
Related Products
Beta Port-P Pressure Module - Beta Port-P Pressure Module
Martel MECP100 Pressure Calibration Pump - The Martel MECP100 Pressure Calibration Pump generates up to 100 PSIG and Vacuum in a small, low cost pump.
Thermocouple Cable Kit Type J, K, T, E - Thermocouple Cable Kit Type J, K, T, E
|
|
Other Items from Frequency Calibrators
Fluke 725 Multifunction Calibrator - Fluke 725 Multifunction Process Calibrator with Optional Pressure Calibration Capability
Fluke 741B Process Calibrator - Fluke 741B Process Calibrator with Optional Pressure Calibration Capability
Fluke 743B Process Calibrator - Fluke 743B Process Calibrator with Optional Pressure Calibration Capability
Fluke 744B Process Calibrator - Fluke 744B Process Calibrator with Optional Pressure Calibration and Hart Interface
Extech 422123 Precision Multifunction Calibrator - Extech 422123 Multi Function Calibrator Sources mA, Volts DC, Thermocouples and Frequency Signals
Extech CMM-17 Process Calibrator Multimeter - Extech CMM-17 Process Calibrator Multimeter sources mA, DC Volts, frequency combined with a TRMS Multimeter
Martel MC-1200 Multifunction Process Calibrator - The Martel MC-1200 Multifunction Process Calibrator features the highest accuracy in its class to 0.015% of reading
GMC Instruments MetraHIT 28C Calibrator, Multimeter, Milli-Ohm Meter - GMC Instruments MetraHIT 28C Calibrator, Multimeter, Milli-Ohm Meter
Druck MCX II Documenting Calibrator - Druck MCX II Documenting Process Calibrator
Martel MC-1000 Multifunction Process Calibrator - Martel MC-1000 Multifunction Process Calibrator sources all common plant signals and features optional pressure calibration capability
Beta MasterCal 990 Precision Multi-Function Documenting Calibrator - Beta MasterCal 990 Precision multi-function documenting Calibrator with Hart Device and Pressure Calibration Capability
|
|
Return To CalibratorDepot.com - Calibrator Depot sells calibrators calibration service NIST traceable calibrations metrology instruments
|
|
|
 |
| Ecommerce powered by MonsterCommerce shopping cart. |
|
