| Pressure Measurement Specification: |
| Operating Pressure Ranges: |
Standard Full Scale Ranges can be Specified
of -14.7 psig to: +15 psi, +30 psi, 100 psi,
or 300 psi Gauge |
| Overpressure: |
The Rated Pressure can be Exceeded by 2X
Causing Negligible Calibration Change,
Subject to a Maximum Safe Working
Pressure of 350 psi. |
| Pressure Media: |
Fluids Compatible with 316 Stainless Steel,
Hastelloy C276, Nylon, Viton and Brass. |
| Accuracy: |
Combined Non-Linearity, Hysteresis and
Repeatability +/-0.075% F.S. for Positive or
Negative Pressures +/-1 Digit. |
| Temperature Effects: |
Over 32 to 105 , the Averaged Span Temperature
Coefficient will not Exceed 0.007% of Reading/ F |
Digital Indicator: |
| Readout & Display: |
+/-99999 Capability, 0.54 LCD Digits with
Additional 16 Text Characters. |
| Pressure Scale Units: |
24 Scale Units are Provided: psi, lb/ft2, inHg,
inH2O, (40 and 68 F) torr, atm, Pa, kPa, MPa,
hPa, mbar, bar, kg/cm2, kg/in2, mmHg, cmHg.
mHg, mmH2O, cmH2O, mH2O, Special, 2 Units
are Presented on the Display. |
| Display Overload: |
Instruments are Capable of Nominal 120% F. S.
Above this, an Overrange Error Code is Displayed. |
| Resolution: |
+/-0.005% F.S. Maximum |
| Response: |
Nominal Rate of Three Readings per
Second on the Digital Display. |
| Zero Control: |
Offset Correction for Pressure and Electrical
Scales by Key-Press, Protected Against Accidental Use. |
| Calibration Control: |
Front Panel Key-Pad Calibration Controls for
Pressure and Electrical Ranges. |
| Position Effect: |
Position Effect |
Electrical Specifications: |
| Electrical Inputs: |
Voltage Measurement:
Range:
Accuracy:
Temperature Coefficient: |
+/-50V
+/-0.15% of Reading +/-0.02 % F.S.
+/-0.006% Reading/ F |
Current Measurement:
Range:
Accuracy:
Temperature Coefficient: |
+/-55mA
+/-0.075% of Reading +/-0.005 % F.S.
+/-0.006% Reading/ F |
| Electrical Outputs: |
| Voltage Output: |
24V Nominal, Floating, 25mA Maximum |
| Current Output: |
Current Output: Loop Check Fixed
12mA Nominal, Source or Sink. |
| Power Supply: |
Battery Powered 4 x 1.5V Zinc Carbon "D" Cells,
50 Hours Nominal Continuous Operation with
No Load on Output Terminals. Battery Low
Condition Indicated by Display Symbol.
Optional Rechargeable Batteries and
External Power Adaptor/Charger Unit Available. |
| Environmental Specification: |
| Temperature: |
Operating: 15 to 120 F
Calibrated: 32 to 105 F
Storage: -5 to +140 F |
| Sealing: |
Sealed to NEMA 4 |
| Safety: |
lEC 1010
EMC Immunity to lEC 801-804
Certification: CE Marked |
| Physical Specification: |
| Weight: |
9 lbs. |
| Dimensions: |
12.6" x 7.7" x 5.0" Nominal |
| Pressure Connection: |
1/8" NPT Female |
| Carrying Case: |
Supplied with the Instrument as Standard
and Includes a Complete Set of Accessories. |
