| | |
|
| |
| | |
|
|
Fluke 789 Loop Calibrator Processmeter
|
Item Number: FLUKE-789
Manufacturer: FLUKE
Manufacturer Part No: FLUKE-789
Product Options
* denotes required field
Fluke 789 Calibration Options*
* Whole number only
|
|
Fluke Model 789 Process Meter & Calibrator
Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better - the ultimate loop calibration multimeter - the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features:
- DMM and Loop Calibrator with
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100 % larger dual display
- 1,200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- 0-100 % mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O port for use with FlukeView Forms Software
- Externally accessible fuses for easy replacement
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Precision 1000 V, 440 mA true-rms digital multimeter
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout
- 20 mA dc current source/loop calibrator/simulator
- Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- IR communication port allows data to be logged to optional
- FlukeView Forms Software for graphical analysis and reporting
Technical Specifications:
| Measurement Function |
| V dc |
Range and Resolution
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
Best Accuracy (% of reading + LSD)
0.1 % + 1 |
| V ac (true-rms) |
Range and Resolution
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
Best Accuracy (% of reading + LSD)
0.7 % + 2 |
| mA dc |
Range and Resolution
30.000 mA
Best Accuracy (% of reading + LSD)
.05 % + 2 |
| A dc |
Range and Resolution
1.000 A (0.440 A continuous)
Best Accuracy (% of reading + LSD)
0.2 % + 2 |
| A ac |
Range and Resolution
1.000 A (0.440 A continuous)
Best Accuracy (% of reading + LSD)
1 % + 2 |
| Resistance |
Range and Resolution
400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M
Best Accuracy (% of reading + LSD)
0.2 % + 1 |
| Frequency (0.5 Hz to 20 kHz) |
Range and Resolution
199.99 Hz, 1999.9 Hz, 19.999 kHz
Best Accuracy (% of reading + LSD)
.005 % + 1 |
| Diode Test |
Range and Resolution
2.000 V (shows diode voltage drop)
Best Accuracy (% of reading + LSD)
2 % + 1 |
| Continuity |
Range and Resolution
Beeps for resistance < approx. 100 ohms |
| Output Function |
DC Current Output
(Internal battery operation) |
Range and Resolution
0.000 to 20.000 mA or 4.000 to 20.000 mA
(selectable at power-up)
Over-range to 24.000 mA
Drive Capability (% of span)
24 V compliance, or,
1,200 Ohms, @ 20 mA
Accuracy
.05 %
|
DC Current Simulate
(Ext. 24 Volt loop supply)Range and Resolution
0.000 to 20.000 mA or 4.000 to 20.000 mA,
(selectable at power-up)
Over-range to 24.000 mA
Drive Capability (% of span)
1000 Ohms, @ 20 mA
Accuracy
.05 %
24 V Loop SupplyRange and Resolution
Minimum 24 V
Drive Capability (% of span)
250 Ohms @ 20 mA
Accuracy
> 24 V
Current Adjustment Modes Range and Resolution
Manual: 0.001 mA, 0.1 mA, 25 % and 100 % step
Automatic: Slow Ramp, Fast Ramp, 25 % step
*Temperature range of 18 C to 28 C, for one year after calibration
| General Specifications |
Maximum voltage applied between
any jack and earth ground: |
1000 V RMS |
| Storage temperature: |
-40 C to 60 C |
| Operating temperature: |
-20 C to 55 C |
| Temperature coefficient: |
0.05 x (specified accuracy) per C
(for temperatures < 18 C or > 28 C) |
|
| Relative humidity |
95 % up to 30 C;
75 % up to 40 C; 45 % up to 50 C;
35 % up to 55 C |
| Vibration: |
Random, 2 g, 5-500 Hz |
| Shock: |
1 meter drop test |
| Safety: |
Designed in accordance with
EN61010, ANSI/ISA S82.01-1994 and
CAN/CSA C22.2 No. 1010..1-92
Over-voltage Category III |
| Size: |
50 mm H x 100 mm W x 203 mm L
(1.97 in H x 3.94 in W x 8.00 in L) |
| Weight: |
600 g (1.3 lbs) |
| Battery: |
Four AA alkaline batteries |
| Battery life: |
140 hours typical (measurement), 10 hours
typical (sourcing 12 mA) |
|
| Warranty: |
3 years |
|
Fluke LPAK80-4 Meter Lock Kit (LockPak)
|
|
|
|
|
|
|